Engineering And Technical Specification
Rolling shutters as per IS: 6248 with suitable operating arrangement (manual, mechanical and/or electric) according to sizes.
M.S. Rolling Shutters shall be made of interlocking lath section formed from bright cold rolled. M.S. strips not less than 0.80mm thick for shutters, with weather seals and wind lock and will have grills for ventilation where necessary Its components will be factory machine & manufacture, primed and field painted. They will be manually or motor operated as required to meet functional requirement and operating convenience.
Rolling Shutter with area up to 9 sq m. shall be push and pull type manually operated while for area above 9 Sq.m. Rolling shutter will be mechanically/ electrically operated. as per IS specifications.
Rolling Shutter Manufactures with MS Strip Machining & Compact Pressed Inter -Locked together a per IS 6248 Complete bottom with locking Arrangement & Side channel Including Hood Box with all accessoriesVishwakarma Rolling Shutter Size And Measurement Details:
Please Forward Follow Ng Details Along With Your Order.
Overall Measurement Shall Be Taken As Follows:
- H-Height of the clear opening between under face of lintel and floor level
- W-Width of the opening between walls.
|Type ||For pull and push type ||For gear type/electrical |
|A and B ||(W+6”)x(H+18”) ||(W+8”)x(H+24”) |
|D, When side guides just fixed on the surface of the wall i.e. projection in the opening ||(W+0”)x(H+9”) ||(W+8”)x(H+18”) |
|D, When side guides are fixed in the groove specially made to fit the side guide I.e no projection from the wall ||(W+6”)x(H+9”) ||(W+8”)x(H+18”) |
|C and E ||(W+0”)x(H+9”) ||(W+6”)x(H+18”) |